bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Palomino Puma XLE Lite Travel Trailer


  • JT's Strongarm Stabilizer Jack Solution for 2020 Puma 31QBBH To Eliminate Movement
  • The JT's Strongarm Stabilizers part # LC191025 are going to do a great job removing that last bit of movement left in your stabilizer jack setup. These do an excellent job removing the side to side movement that is allowed with standard stabilizer jacks so this would be an excellent option.
    view full answer...

  • Replacement Follow Leg for 2018 Palomino Puma 286-RBSS
  • Thank you for the pictures you submitted of the landing gear leg you need to replace. Based on that the correct follow leg you need for your Palomino is the part # LC179014.
    view full answer...

  • Replacement Vent Lid For A 2018 Palomino Puma XLE Lite Travel Trailer
  • No worries, we have something that will work great with your 2018 Palomino Puma XLE Lite Travel Trailer. Check out the: -Replacement Lid for Ventline, Maxxair, Fan-Tastic Vent, Ventadome, Jensen, and Elixir RV Roof Vents # A10-3376. This is a replacement lid that will work with just about any roof vent on the market today, and with your trailer being pretty new this'll work for you. We do also have this lid available in white if you're interested: # A10-3375.
    view full answer...

  • 225/75R15 Trailer Tire Recommendation to Fit With 5" Wide Wheel
  • For your application I recommend picking up the Westlake ST225/75R15 Radial Trailer Tire - Load Range E # LHWL304 which is rated to fit a 5" wide wheel. Tires only fit certain wheel widths so you want to make sure you choose one that is designed to fit your 5" wide wheels, and according to my research the Westlake is the only one that will fit your current wheels. Attached is a review video for you to check out!
    view full answer...

  • Dexter Trailer Springs Over-Under Conversion Kit for 2020 Palomino Puma 286RBSS 5th Wheel
  • Based on my research your 2020 Palomino Puma 286RBSS 5th Wheel has axles that are in the 6,000 lb range, which means they should be 3 inch diameter round axles, though I highly recommend verifying this. Also make sure the suspension on your Palomino is double-eye spring suspension, and if so, because it is a tandem axle trailer you will need two of the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. I have added a link to a video review of this kit for you to check out as well.
    view full answer...

  • Replacement Safety Chain Quick Links for 7000-lbs GVWR Travel Trailer
  • The short answer to your question is, yes. You can use the Curt Safety Chain Quick Link # C82932 to keep your current safety chains in good working. The safe working load limit that you see on products like the Curt Safety Chain Quick Link # C82932 has to do with everyday use. So, if you were to use this quick link to regularly pull something Fulton doesn't recommend exceeding 3,300 lbs (6,600 lbs for 2 of them). Since you're looking to use these for your trailer safety chains you need...
    view full answer...